Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
Excellent
Excellent resistance - recommended for continuous use
Why is LDPE resistant to Ammonium Chloride?
LDPE shows excellent resistance to Ammonium Chloride due to its flexible polymer chains that resist attack from most aqueous solutions and inorganic chemicals.
⚠️ When NOT to use LDPE
Avoid using Low-Density Polyethylene with strong oxidizers, chlorinated solvents, and aromatic compounds. Temperature limit is approximately 60°C.
Comparison Table — All Materials for Ammonium Chloride
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | A | A |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | A | NR |
| SS 304 | A | NR |
| Aluminium | C | D |
| PVC Rigid | A | C |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | A | NR |
| PETG | B | B |
| Acetal (POM) | B | C |
| Nylon (PA) | A | NR |
| Polysulfone | A | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 60°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: HDPE (stronger) or PP (higher temp). View all materials for Ammonium Chloride →
FAQ
Is LDPE resistant to Ammonium Chloride?
LDPE has Excellent (A) resistance to Ammonium Chloride at 20°C.
Can I store Ammonium Chloride in LDPE?
Yes, LDPE is rated A for Ammonium Chloride.