Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
No Data
No data available
Why is EPDM resistant to Crotonaldehyde?
EPDM shows excellent resistance to Crotonaldehyde due to its saturated polymer backbone resisting degradation from water, steam, acids, and alkalis.
⚠️ When NOT to use EPDM
Avoid using EPDM Rubber with mineral oils, petroleum fuels, and aromatic solvents which cause swelling and degradation.
Comparison Table — All Materials for Crotonaldehyde
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | NR |
| LDPE | NR | NR |
| PP | A | NR |
| PTFE | A | NR |
| PVDF | A | C |
| FEP | A | A |
| ECTFE/ETFE | NR | NR |
| EPDM | A | NR |
| Viton (FPM) | C | NR |
| NBR | D | D |
| Silicone | NR | NR |
| SS 316 | A | A |
| SS 304 | A | A |
| Aluminium | A | NR |
| PVC Rigid | D | D |
| PVC Flexible | NR | NR |
| PMP | D | D |
| Polystyrene | NR | NR |
| SAN | NR | NR |
| Polycarbonate | D | D |
| PETG | NR | NR |
| Acetal (POM) | B | B |
| Nylon (PA) | B | B |
| Polysulfone | NR | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 120°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: Viton for oils, PTFE for universal. View all materials for Crotonaldehyde →
FAQ
Is EPDM resistant to Crotonaldehyde?
EPDM has Excellent (A) resistance to Crotonaldehyde at 20°C. Excellent resistance - recommended for continuous use.
Can I store Crotonaldehyde in EPDM containers?
Yes, EPDM is rated A (Excellent) for Crotonaldehyde.