Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
No Data
No data available
Why is PETG resistant to Cyclohexane?
PETG shows excellent resistance to Cyclohexane due to its glycol-modified polyester structure providing moderate chemical resistance.
⚠️ When NOT to use PETG
Avoid using PETG with strong acids, alkalis, and most organic solvents. Better impact resistance than PET but lower chemical resistance.
Comparison Table — All Materials for Cyclohexane
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | C | D |
| LDPE | C | D |
| PP | C | D |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | B |
| EPDM | D | D |
| Viton (FPM) | A | NR |
| NBR | A | NR |
| Silicone | NR | NR |
| SS 316 | A | A |
| SS 304 | A | A |
| Aluminium | A | A |
| PVC Rigid | B | C |
| PVC Flexible | A | NR |
| PMP | D | D |
| Polystyrene | D | D |
| SAN | A | C |
| Polycarbonate | C | C |
| PETG | A | NR |
| Acetal (POM) | A | A |
| Nylon (PA) | A | NR |
| Polysulfone | D | D |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 70°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: Polycarbonate or PP. View all materials for Cyclohexane →
FAQ
Is PETG resistant to Cyclohexane?
PETG has Excellent (A) resistance to Cyclohexane at 20°C.
Can I store Cyclohexane in PETG?
Yes, PETG is rated A for Cyclohexane.