Rating
| Concentration | 20 °C | 50 °C | Remark |
|---|---|---|---|
| technical grade | A | A |
Material comparison at 20 °C
Resistance overview
FEP shows very good resistance (A) to Diethyl Ether at technical grade at 20 °C, meaning the material remains essentially unaffected by this chemical under standard laboratory test conditions. The rating remains stable between 20 °C and 50 °C, which means this material can also handle moderately elevated process temperatures without additional risk.
Application context
Diethyl Ether is commonly encountered in pharmaceutical manufacturing and chemical synthesis. FEP (Fluorinated ethylene propylene) is a fluoropolymer typically used for seals, gaskets, valve seats and lined equipment. Since Diethyl Ether is flammable, material selection must also consider the risk of static charge buildup and the need for proper grounding in storage and transfer systems.
Practical recommendation
FEP can be used with confidence for Diethyl Ether containment and handling. The A rating indicates that the material shows no significant change in weight, dimensions, or mechanical properties after prolonged contact under test conditions. This holds true at both 20 °C and 50 °C, giving a good safety margin for typical process environments.
Did you know?
Fluorinated ethylene propylene was first developed in the 1960s and remains one of the most widely used fluoropolymers in chemical handling equipment.
Materials rated A or B at 20 °C
Based on the row for technical grade, 20 °C.
- Thermoplastics
- Nylon (PA) A, Acetal (POM) A, PETG A
- Fluoropolymers
- PTFE A, PVDF A, ECTFE/ETFE A
- Metals
- SS 316 A, SS 304 A, Aluminium A
About FEP
FEP has nearly the chemical resistance of PTFE and can be melt-processed. Its service temperature, about 200 °C, is lower than that of PTFE.
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.