Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
Excellent
Excellent resistance - recommended for continuous use
Why is PVDF resistant to Magnesium Chloride?
PVDF shows excellent resistance to Magnesium Chloride due to its fluorinated polymer backbone providing excellent resistance to acids, bases, and organic solvents.
⚠️ When NOT to use PVDF
Avoid using Polyvinylidene Fluoride with strong bases (NaOH >10%), ketones, esters, and amines. Service temperature up to 150°C.
Comparison Table — All Materials for Magnesium Chloride
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | A |
| Viton (FPM) | A | A |
| NBR | A | NR |
| Silicone | A | A |
| SS 316 | A | NR |
| SS 304 | A | NR |
| Aluminium | A | A |
| PVC Rigid | A | A |
| PVC Flexible | A | NR |
| PMP | A | NR |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | A | NR |
| PETG | A | NR |
| Acetal (POM) | A | B |
| Nylon (PA) | A | NR |
| Polysulfone | A | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 150°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PTFE for broader resistance. View all materials for Magnesium Chloride →
FAQ
Is PVDF resistant to Magnesium Chloride?
PVDF has Excellent (A) resistance to Magnesium Chloride at 20°C.
Can I store Magnesium Chloride in PVDF?
Yes, PVDF is rated A for Magnesium Chloride.