Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
Excellent
Excellent resistance - recommended for continuous use
Why is Polysulfone resistant to Magnesium Hydroxide?
Polysulfone shows excellent resistance to Magnesium Hydroxide due to its sulfone group providing thermal and chemical stability up to 150°C.
⚠️ When NOT to use Polysulfone
Avoid using Polysulfone (PSU) with ketones, esters, and chlorinated solvents. Excellent for hot water and steam applications.
Comparison Table — All Materials for Magnesium Hydroxide
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | A |
| Viton (FPM) | A | A |
| NBR | B | NR |
| Silicone | A | A |
| SS 316 | A | A |
| SS 304 | A | A |
| Aluminium | A | A |
| PVC Rigid | A | A |
| PVC Flexible | A | A |
| PMP | A | NR |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | B | B |
| PETG | A | A |
| Acetal (POM) | A | A |
| Nylon (PA) | A | NR |
| Polysulfone | A | A |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 150°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PVDF or PTFE. View all materials for Magnesium Hydroxide →
FAQ
Is Polysulfone resistant to Magnesium Hydroxide?
Polysulfone has Excellent (A) resistance to Magnesium Hydroxide at 20°C. Excellent resistance - recommended for continuous use.
Can I store Magnesium Hydroxide in Polysulfone containers?
Yes, Polysulfone is rated A (Excellent) for Magnesium Hydroxide.