Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
Excellent
Excellent resistance - recommended for continuous use
Why is FEP resistant to Sodium Chloride?
FEP shows excellent resistance to Sodium Chloride due to its fully fluorinated structure similar to PTFE, offering near-universal chemical resistance.
⚠️ When NOT to use FEP
Avoid using FEP (Fluorinated Ethylene Propylene) with molten alkali metals and fluorine gas. Suitable up to 200°C.
Comparison Table — All Materials for Sodium Chloride
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | A |
| Viton (FPM) | A | A |
| NBR | A | A |
| Silicone | A | A |
| SS 316 | A | B |
| SS 304 | A | B |
| Aluminium | C | D |
| PVC Rigid | A | A |
| PVC Flexible | A | A |
| PMP | A | A |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | A | A |
| PETG | A | A |
| Acetal (POM) | A | B |
| Nylon (PA) | A | A |
| Polysulfone | A | A |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 200°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PTFE for higher temps. View all materials for Sodium Chloride →
FAQ
Is FEP resistant to Sodium Chloride?
FEP has Excellent (A) resistance to Sodium Chloride at 20°C.
Can I store Sodium Chloride in FEP?
Yes, FEP is rated A for Sodium Chloride.