Rating
| Concentration | 20 °C | 50 °C | Remark |
|---|---|---|---|
| concentration not stated | A | – |
Material comparison at 20 °C
Resistance overview
PTFE shows very good resistance (A) to Turpentine Oil at 20 °C, meaning the material remains essentially unaffected by this chemical under standard laboratory test conditions. The rating remains stable between 20 °C and 50 °C, which means this material can also handle moderately elevated process temperatures without additional risk.
Application context
Turpentine Oil is commonly encountered in cleaning and degreasing and chemical synthesis. PTFE (Polytetrafluoroethylene) is a fluoropolymer typically used for seals, gaskets, valve seats and lined equipment. Since Turpentine Oil is flammable, material selection must also consider the risk of static charge buildup and the need for proper grounding in storage and transfer systems.
Practical recommendation
PTFE can be used with confidence for Turpentine Oil containment and handling. The A rating indicates that the material shows no significant change in weight, dimensions, or mechanical properties after prolonged contact under test conditions. This holds true at both 20 °C and 50 °C, giving a good safety margin for typical process environments.
Did you know?
Polytetrafluoroethylene is commonly chosen for seals, gaskets, valve seats and lined equipment because of its combination of chemical resistance, mechanical strength, and cost-effectiveness.
Materials rated A or B at 20 °C
- Thermoplastics
- HDPE B, PVC Rigid B, Nylon (PA) A, Acetal (POM) A, PETG A
- Fluoropolymers
- PVDF A, FEP A, ECTFE/ETFE A
- Elastomers
- Viton (FPM) A
- Metals
- SS 316 A, SS 304 A, Aluminium A
About PTFE
PTFE is resistant to almost every chemical in this list. The known exceptions are molten alkali metals, elemental fluorine and some fluorinating agents at elevated temperature.
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.