Compatibility Rating
📊 Note: Ammonium Hydroxide resistance varies by concentration. Data available for: 30 %, 5 %. Search for specific concentrations →
Why is FEP resistant to Ammonium Hydroxide?
FEP shows excellent resistance to Ammonium Hydroxide due to its fully fluorinated structure similar to PTFE, offering near-universal chemical resistance.
⚠️ When NOT to use FEP
Avoid using FEP (Fluorinated Ethylene Propylene) with molten alkali metals and fluorine gas. Suitable up to 200°C.
Comparison Table — All Materials for Ammonium Hydroxide
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | C |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | C | C |
| NBR | D | D |
| Silicone | NR | NR |
| SS 316 | A | A |
| SS 304 | A | A |
| Aluminium | A | A |
| PVC Rigid | A | B |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | B | C |
| SAN | B | B |
| Polycarbonate | D | D |
| PETG | B | D |
| Acetal (POM) | A | B |
| Nylon (PA) | C | C |
| Polysulfone | B | C |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 200°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PTFE for higher temps. View all materials for Ammonium Hydroxide →
FAQ
Is FEP resistant to Ammonium Hydroxide?
FEP has Excellent (A) resistance to Ammonium Hydroxide at 20°C.
Can I store Ammonium Hydroxide in FEP?
Yes, FEP is rated A for Ammonium Hydroxide.
📊 Note: Ammonium Hydroxide resistance varies by concentration. Data available for: 30 %, 5 %. Search for specific concentrations →