Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
No Data
No data available
Why is EPDM resistant to Ammonium Sulfate?
EPDM shows excellent resistance to Ammonium Sulfate due to its saturated polymer backbone resisting degradation from water, steam, acids, and alkalis.
⚠️ When NOT to use EPDM
Avoid using EPDM Rubber with mineral oils, petroleum fuels, and aromatic solvents which cause swelling and degradation.
Comparison Table — All Materials for Ammonium Sulfate
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | B | C |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | A | B |
| SS 304 | A | A |
| Aluminium | A | A |
| PVC Rigid | A | A |
| PVC Flexible | A | NR |
| PMP | A | A |
| Polystyrene | A | NR |
| SAN | A | A |
| Polycarbonate | A | A |
| PETG | B | B |
| Acetal (POM) | B | NR |
| Nylon (PA) | A | NR |
| Polysulfone | A | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 120°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: Viton for oils, PTFE for universal. View all materials for Ammonium Sulfate →
FAQ
Is EPDM resistant to Ammonium Sulfate?
EPDM has Excellent (A) resistance to Ammonium Sulfate at 20°C.
Can I store Ammonium Sulfate in EPDM?
Yes, EPDM is rated A for Ammonium Sulfate.