Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
Excellent
Excellent resistance - recommended for continuous use
Why is HDPE resistant to Magnesium Bromide?
HDPE shows excellent resistance to Magnesium Bromide due to its tightly packed molecular structure and chemical inertness to most acids, bases, and salts.
⚠️ When NOT to use HDPE
Avoid using High-Density Polyethylene with strong oxidizing acids (nitric, chromic), chlorinated solvents, and aromatic hydrocarbons. Maximum service temperature is around 80°C.
Comparison Table — All Materials for Magnesium Bromide
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | A |
| Viton (FPM) | A | A |
| NBR | B | B |
| Silicone | NR | NR |
| SS 316 | NR | NR |
| SS 304 | NR | NR |
| Aluminium | C | C |
| PVC Rigid | NR | NR |
| PVC Flexible | NR | NR |
| PMP | NR | NR |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | B | B |
| PETG | A | A |
| Acetal (POM) | A | A |
| Nylon (PA) | B | B |
| Polysulfone | NR | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 80°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PP (higher temp) or PTFE (universal). View all materials for Magnesium Bromide →
FAQ
Is HDPE resistant to Magnesium Bromide?
HDPE has Excellent (A) resistance to Magnesium Bromide at 20°C. Excellent resistance - recommended for continuous use.