Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
Excellent
Excellent resistance - recommended for continuous use
Why is PP resistant to Magnesium Bromide?
PP shows excellent resistance to Magnesium Bromide due to its semi-crystalline structure providing good chemical resistance to acids, bases, and organic solvents at moderate concentrations.
⚠️ When NOT to use PP
Avoid using Polypropylene with concentrated oxidizing acids, chlorinated solvents, and aromatic hydrocarbons. Becomes brittle below 0°C.
Comparison Table — All Materials for Magnesium Bromide
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | A |
| Viton (FPM) | A | A |
| NBR | B | B |
| Silicone | NR | NR |
| SS 316 | NR | NR |
| SS 304 | NR | NR |
| Aluminium | C | C |
| PVC Rigid | NR | NR |
| PVC Flexible | NR | NR |
| PMP | NR | NR |
| Polystyrene | A | A |
| SAN | A | A |
| Polycarbonate | B | B |
| PETG | A | A |
| Acetal (POM) | A | A |
| Nylon (PA) | B | B |
| Polysulfone | NR | NR |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 100°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PVDF or PTFE for higher temperatures. View all materials for Magnesium Bromide →
FAQ
Is Polypropylene (PP) resistant to Magnesium Bromide?
Polypropylene (PP) has Excellent (A) resistance to Magnesium Bromide at 20°C. Excellent resistance - recommended for continuous use.