Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
No Data
No data available
Comparison Table — All Materials for Stearic Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | C |
| LDPE | A | C |
| PP | A | C |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | C | NR |
| Viton (FPM) | A | A |
| NBR | C | C |
| Silicone | NR | NR |
| SS 316 | A | A |
| SS 304 | A | A |
| Aluminium | A | A |
| PVC Rigid | A | B |
| PVC Flexible | A | A |
| PMP | A | A |
| Polystyrene | A | B |
| SAN | A | A |
| Polycarbonate | A | B |
| PETG | A | NR |
| Acetal (POM) | A | NR |
| Nylon (PA) | A | NR |
| Polysulfone | B | B |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 100°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PVDF or PTFE. View all materials for Stearic Acid →
FAQ
Is Nylon (PA) resistant to Stearic Acid?
Nylon (PA) has Excellent (A) resistance to Stearic Acid at 20°C.
Can I store Stearic Acid in Nylon (PA)?
Yes, Nylon (PA) is rated A for Stearic Acid.