Rating
| Concentration | 20 °C | 50 °C | Remark |
|---|---|---|---|
| concentration not stated | B | – |
Material comparison at 20 °C
Resistance overview
SS 316 shows good but limited resistance (B) to Trichloroacetic Acid (TCA) at 20 °C. The material can be used in contact with this chemical, but minor effects such as slight swelling or a small reduction in mechanical properties may occur over extended exposure periods. Regular inspection of components in service is advisable. The rating remains stable between 20 °C and 50 °C, which means this material can also handle moderately elevated process temperatures without additional risk.
Application context
Trichloroacetic Acid (TCA) is commonly encountered in laboratory work and water treatment. SS 316 (Stainless steel 1.4401 (AISI 316)) is a metal typically used for vessels, heat exchangers, fittings and structural components. Because Trichloroacetic Acid (TCA) is classified as corrosive, the choice of containment material is especially critical to prevent leaks, equipment damage, and safety hazards.
Practical recommendation
SS 316 is suitable for use with Trichloroacetic Acid (TCA) under normal conditions, but some minor effects on the material are expected over time. Periodic monitoring for swelling, softening, or weight change is recommended, especially for long-service components. For safety-critical or long-life applications, consider HDPE, PP, FEP instead, which are rated A for this chemical.
Did you know?
When choosing between metals for Trichloroacetic Acid (TCA) service, engineers consider not just the resistance rating but also factors such as permeation rate, creep resistance, and weldability.
Materials rated A or B at 20 °C
- Thermoplastics
- HDPE A, PP A
- Fluoropolymers
- PTFE A, PVDF A, FEP A
- Metals
- Aluminium A
About SS 316
Stainless steel 316 (1.4401) contains molybdenum, which improves resistance to chlorides over 304. Hydrochloric acid and other halide acids still cause pitting.
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.