Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
No Data
No data available
Why is Aluminium resistant to Adipic Acid?
Aluminium shows excellent resistance to Adipic Acid due to its protective oxide layer (Al₂O₃) that forms naturally and resists many chemicals.
⚠️ When NOT to use Aluminium
Avoid using Aluminium with strong acids (HCl, H₂SO₄), strong alkalis (NaOH), and mercury compounds which destroy the protective oxide layer.
Comparison Table — All Materials for Adipic Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | B |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | NR |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | A | NR |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | B | B |
| SS 304 | B | B |
| Aluminium | A | NR |
| PVC Rigid | A | C |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | A | A |
| SAN | NR | NR |
| Polycarbonate | A | A |
| PETG | B | B |
| Acetal (POM) | A | C |
| Nylon (PA) | NR | NR |
| Polysulfone | B | B |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 300°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: SS 316 for corrosive chemicals. View all materials for Adipic Acid →
FAQ
Is Aluminium resistant to Adipic Acid?
Aluminium has Excellent (A) resistance to Adipic Acid at 20°C. Excellent resistance - recommended for continuous use.
Can I store Adipic Acid in Aluminium containers?
Yes, Aluminium is rated A (Excellent) for Adipic Acid.