Compatibility Rating
At 20°C (68°F)
Good
Good resistance - suitable for intermittent contact
At 50°C (122°F)
Good
Good resistance - suitable for intermittent contact
Why is PETG resistant to Adipic Acid?
PETG shows good resistance to Adipic Acid due to its glycol-modified polyester structure providing moderate chemical resistance.
⚠️ When NOT to use PETG
Avoid using PETG with strong acids, alkalis, and most organic solvents. Better impact resistance than PET but lower chemical resistance.
Comparison Table — All Materials for Adipic Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | B |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | NR |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | A | NR |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | B | B |
| SS 304 | B | B |
| Aluminium | A | NR |
| PVC Rigid | A | C |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | A | A |
| SAN | NR | NR |
| Polycarbonate | A | A |
| PETG | B | B |
| Acetal (POM) | A | C |
| Nylon (PA) | NR | NR |
| Polysulfone | B | B |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 70°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: Polycarbonate or PP. View all materials for Adipic Acid →
FAQ
Is PETG resistant to Adipic Acid?
PETG has Good (B) resistance to Adipic Acid at 20°C. Good resistance - suitable for intermittent contact.
Can I store Adipic Acid in PETG containers?
Yes, PETG is rated B (Good) for Adipic Acid.