Compatibility Rating
At 20°C (68°F)
Excellent
Excellent resistance - recommended for continuous use
At 50°C (122°F)
Excellent
Excellent resistance - recommended for continuous use
Why is Polycarbonate resistant to Adipic Acid?
Polycarbonate shows excellent resistance to Adipic Acid due to its carbonate group structure, though it has limited chemical resistance compared to other engineering plastics.
⚠️ When NOT to use Polycarbonate
Avoid using Polycarbonate with alkalis, amines, ketones, esters, and many organic solvents. Prone to stress cracking.
Comparison Table — All Materials for Adipic Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | B |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | NR |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | A | NR |
| Viton (FPM) | A | NR |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | B | B |
| SS 304 | B | B |
| Aluminium | A | NR |
| PVC Rigid | A | C |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | A | A |
| SAN | NR | NR |
| Polycarbonate | A | A |
| PETG | B | B |
| Acetal (POM) | A | C |
| Nylon (PA) | NR | NR |
| Polysulfone | B | B |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 120°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: Polysulfone or PETG. View all materials for Adipic Acid →
FAQ
Is Polycarbonate resistant to Adipic Acid?
Polycarbonate has Excellent (A) resistance to Adipic Acid at 20°C. Excellent resistance - recommended for continuous use.
Can I store Adipic Acid in Polycarbonate containers?
Yes, Polycarbonate is rated A (Excellent) for Adipic Acid.