Compatibility Rating
At 20°C
Fair
Limited resistance - short-term exposure only
At 50°C
Fair
Limited resistance - short-term exposure only
Why is Viton (FPM) rated this way to Dichloromethane?
Viton (FPM) has limited resistance to Dichloromethane. Short-term exposure may be acceptable, but prolonged contact is not recommended.
⚠️ When NOT to use Viton (FPM)
Avoid using Viton Fluoroelastomer with ketones, esters, amines, and hot water/steam. Excellent for fuel and oil applications.
Comparison Table — All Materials for Dichloromethane
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | D | D |
| LDPE | D | D |
| PP | C | D |
| PTFE | A | A |
| PVDF | A | C |
| FEP | A | A |
| ECTFE/ETFE | B | B |
| EPDM | D | D |
| Viton (FPM) | C | C |
| NBR | D | D |
| Silicone | NR | NR |
| SS 316 | A | NR |
| SS 304 | A | NR |
| Aluminium | A | NR |
| PVC Rigid | D | D |
| PVC Flexible | D | D |
| PMP | C | D |
| Polystyrene | D | D |
| SAN | D | D |
| Polycarbonate | D | D |
| PETG | D | D |
| Acetal (POM) | C | NR |
| Nylon (PA) | C | D |
| Polysulfone | D | D |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Maximum service temperature for this material is 200°C. Always verify compatibility at your specific operating conditions.
🔄 Better Alternative?
Consider: PTFE for chemical universality. View all materials for Dichloromethane →
FAQ
Is Viton (FPM) resistant to Dichloromethane?
Viton (FPM) has Fair (C) resistance to Dichloromethane at 20°C.
Can I store Dichloromethane in Viton (FPM)?
Caution - Viton (FPM) is rated C for Dichloromethane.