Compatibility Rating
📊 Note: Perchloric Acid resistance varies by concentration. Data available for: 20 %, 70 %. Search for specific concentrations →
Why is LDPE rated this way to Perchloric Acid?
LDPE has limited resistance to Perchloric Acid. Short-term exposure may be acceptable, but prolonged contact is not recommended.
⚠️ When NOT to use LDPE
Avoid using Low-Density Polyethylene with strong oxidizers, chlorinated solvents, and aromatic compounds. Temperature limit is approximately 60°C.
Comparison Table — All Materials for Perchloric Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | B | D |
| LDPE | C | D |
| PP | D | D |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | B |
| EPDM | C | NR |
| Viton (FPM) | A | A |
| NBR | D | D |
| Silicone | NR | NR |
| SS 316 | NR | NR |
| SS 304 | NR | NR |
| Aluminium | D | D |
| PVC Rigid | C | D |
| PVC Flexible | D | D |
| PMP | B | D |
| Polystyrene | B | C |
| SAN | NR | NR |
| Polycarbonate | D | D |
| PETG | D | D |
| Acetal (POM) | D | D |
| Nylon (PA) | D | D |
| Polysulfone | D | D |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Maximum service temperature for this material is 60°C. Always verify compatibility at your specific operating conditions.
🔄 Better Alternative?
Consider: HDPE (stronger) or PP (higher temp). View all materials for Perchloric Acid →
FAQ
Is LDPE resistant to Perchloric Acid?
LDPE has Fair (C) resistance to Perchloric Acid at 20°C. Limited resistance - short-term exposure only.
Can I store Perchloric Acid in LDPE containers?
Use caution - LDPE is rated C (Fair) for Perchloric Acid.
📊 Note: Perchloric Acid resistance varies by concentration. Data available for: 20 %, 70 %. Search for specific concentrations →