Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
Excellent
Excellent resistance - recommended for continuous use
Why is LDPE resistant to Tartaric Acid?
LDPE shows excellent resistance to Tartaric Acid due to its flexible polymer chains that resist attack from most aqueous solutions and inorganic chemicals.
⚠️ When NOT to use LDPE
Avoid using Low-Density Polyethylene with strong oxidizers, chlorinated solvents, and aromatic compounds. Temperature limit is approximately 60°C.
Comparison Table — All Materials for Tartaric Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | C | NR |
| Viton (FPM) | A | A |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | A | B |
| SS 304 | A | C |
| Aluminium | D | D |
| PVC Rigid | A | B |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | B | B |
| SAN | A | A |
| Polycarbonate | A | B |
| PETG | NR | NR |
| Acetal (POM) | C | C |
| Nylon (PA) | D | D |
| Polysulfone | A | A |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 60°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: HDPE (stronger) or PP (higher temp). View all materials for Tartaric Acid →
FAQ
Is LDPE resistant to Tartaric Acid?
LDPE has Excellent (A) resistance to Tartaric Acid at 20°C.
Can I store Tartaric Acid in LDPE?
Yes, LDPE is rated A for Tartaric Acid.