Compatibility Rating
At 20°C
Excellent
Excellent resistance - recommended for continuous use
At 50°C
Excellent
Excellent resistance - recommended for continuous use
Comparison Table — All Materials for Tartaric Acid
| Material | 20°C | 50°C |
|---|---|---|
| HDPE | A | A |
| LDPE | A | A |
| PP | A | A |
| PTFE | A | A |
| PVDF | A | A |
| FEP | A | A |
| ECTFE/ETFE | A | A |
| EPDM | C | NR |
| Viton (FPM) | A | A |
| NBR | A | A |
| Silicone | NR | NR |
| SS 316 | A | B |
| SS 304 | A | C |
| Aluminium | D | D |
| PVC Rigid | A | B |
| PVC Flexible | A | C |
| PMP | A | A |
| Polystyrene | B | B |
| SAN | A | A |
| Polycarbonate | A | B |
| PETG | NR | NR |
| Acetal (POM) | C | C |
| Nylon (PA) | D | D |
| Polysulfone | A | A |
A=Excellent · B=Good · C=Fair · D=Poor · NR=No Data
🌡️ Temperature Note
Good resistance at both 20°C and 50°C. Maximum service temperature for this material is 120°C — above this, degradation risk increases significantly.
🔄 Better Alternative?
Consider: PP or PTFE. View all materials for Tartaric Acid →
FAQ
Is PMP resistant to Tartaric Acid?
PMP has Excellent (A) resistance to Tartaric Acid at 20°C.
Can I store Tartaric Acid in PMP?
Yes, PMP is rated A for Tartaric Acid.