Rating
| Concentration | 20 °C | 50 °C | Remark |
|---|---|---|---|
| 12,5 % Cl | A | C | |
| 15 % | A | C | |
| dilute | A | C | |
| saturated | A | C |
Material comparison at 20 °C
Resistance overview
Polystyrene shows excellent resistance to Sodium Hypochlorite (Bleach) across all 4 tested concentrations (12,5 % Cl, 15 %, dilute, saturated) at 20 °C, making it a reliable choice for storage, transfer, and handling applications involving this chemical at any of the tested strengths. However, at 50 °C the resistance rating drops, indicating that temperature must be factored into the design. For heated applications, additional testing under actual service conditions is strongly recommended.
Application context
Sodium Hypochlorite (Bleach) is commonly encountered in pulp and paper and chemical processing. Polystyrene (Polystyrene) is a thermoplastic typically used for tanks, piping, containers and liners. Because Sodium Hypochlorite (Bleach) is classified as corrosive, the choice of containment material is especially critical to prevent leaks, equipment damage, and safety hazards.
Practical recommendation
Polystyrene can be used with confidence for Sodium Hypochlorite (Bleach) containment and handling. The A rating indicates that the material shows no significant change in weight, dimensions, or mechanical properties after prolonged contact under test conditions. At elevated temperatures (50 °C), some reduction in resistance occurs, so periodic inspection is advisable for heated applications. Always verify performance under actual operating conditions before committing to a design.
Did you know?
Polystyrene is commonly chosen for tanks, piping, containers and liners because of its combination of chemical resistance, mechanical strength, and cost-effectiveness.
Materials rated A or B at 20 °C
Based on the row for 15 %, 20 °C.
- Thermoplastics
- HDPE B, PP B, PVC Rigid A, LDPE B, Polycarbonate B, Polysulfone A, PMP A, SAN A
- Fluoropolymers
- PTFE A, FEP A, ECTFE/ETFE A
- Elastomers
- Viton (FPM) A
- Metals
- SS 316 B
About Polystyrene
Polystyrene is attacked by most organic solvents, including ketones, esters, aromatic and chlorinated hydrocarbons. It is used for dilute aqueous solutions.
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.