Rating
| Concentration | 20 °C | 50 °C | Remark |
|---|---|---|---|
| 12,5 % Cl | A | A | |
| 15 % | A | A | |
| dilute | A | A | |
| saturated | A | A |
Material comparison at 20 °C
Resistance overview
SAN shows excellent resistance to Sodium Hypochlorite (Bleach) across all 4 tested concentrations (12,5 % Cl, 15 %, dilute, saturated) at 20 °C, making it a reliable choice for storage, transfer, and handling applications involving this chemical at any of the tested strengths. The rating remains stable between 20 °C and 50 °C, which means this material can also handle moderately elevated process temperatures without additional risk.
Application context
Sodium Hypochlorite (Bleach) is commonly encountered in chemical processing and pulp and paper. SAN (Styrene-acrylonitrile) is a thermoplastic typically used for tanks, piping, containers and liners. Because Sodium Hypochlorite (Bleach) is classified as corrosive, the choice of containment material is especially critical to prevent leaks, equipment damage, and safety hazards.
Practical recommendation
SAN can be used with confidence for Sodium Hypochlorite (Bleach) containment and handling. The A rating indicates that the material shows no significant change in weight, dimensions, or mechanical properties after prolonged contact under test conditions. This holds true at both 20 °C and 50 °C, giving a good safety margin for typical process environments.
Did you know?
When choosing between thermoplastics for Sodium Hypochlorite (Bleach) service, engineers consider not just the resistance rating but also factors such as permeation rate, creep resistance, and weldability.
Materials rated A or B at 20 °C
Based on the row for 15 %, 20 °C.
- Thermoplastics
- HDPE B, PP B, PVC Rigid A, LDPE B, Polycarbonate B, Polystyrene A, Polysulfone A, PMP A
- Fluoropolymers
- PTFE A, FEP A, ECTFE/ETFE A
- Elastomers
- Viton (FPM) A
- Metals
- SS 316 B
About SAN
Styrene-acrylonitrile resists oils and dilute acids better than polystyrene, but ketones, esters and aromatic and chlorinated solvents still attack it.
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.