Summary
- Nylon (PA) is rated better with
- Alkalis (+27 points); Esters and ethers (+16 points)
- PVDF is rated better with
- Mineral acids (+82 points); Organic acids (+69 points); Phenols (+63 points); Oxidising agents and halogens (+61 points); Alcohols and glycols (+31 points); Amines and nitrogen compounds (+26 points); Salts and salt solutions (+21 points)
- Within 10 points of each other
- Ketones and aldehydes; Aromatic hydrocarbons; Fuels, mineral oils and aliphatic hydrocarbons; Vegetable and animal oils, fats, essential oils; Halogenated hydrocarbons; Foods and beverages
Points are the difference in the share of rows rated A or B.
The two materials
Nylon (PA)
Polyamide (nylon)
Polyamide (nylon) resists fuels, oils and many solvents. Mineral acids, even dilute, and strong oxidisers attack it, and it absorbs water.
Rated rows: 945. A 44 %, B 21 %, C 17 %, D 18 %
PVDF
Polyvinylidene fluoride
PVDF resists acids, halogens and hydrocarbons. Strong bases, amines, ketones and esters attack it. Service temperature is up to about 150 °C.
Rated rows: 944. A 73 %, B 15 %, C 10 %, D 2 %
Share of rows rated A or B, by chemical class
How often the two ratings agree
Chemical classes were assigned by this site, not by the source. Mixtures and trade products without a clear class are not counted.
By chemical class
| Chemical class | Nylon (PA): rated A or B | PVDF: rated A or B |
|---|---|---|
| Mineral acids | 5 % (63 rows) | 87 % (61 rows) |
| Organic acids | 25 % (63 rows) | 94 % (64 rows) |
| Alkalis | 91 % (22 rows) | 64 % (22 rows) |
| Salts and salt solutions | 78 % (194 rows) | 99 % (198 rows) |
| Oxidising agents and halogens | 26 % (62 rows) | 87 % (62 rows) |
| Alcohols and glycols | 67 % (58 rows) | 98 % (58 rows) |
| Phenols | 8 % (13 rows) | 71 % (14 rows) |
| Ketones and aldehydes | 53 % (32 rows) | 62 % (34 rows) |
| Esters and ethers | 80 % (65 rows) | 64 % (66 rows) |
| Amines and nitrogen compounds | 50 % (34 rows) | 76 % (38 rows) |
| Aromatic hydrocarbons | 100 % (14 rows) | 100 % (14 rows) |
| Fuels, mineral oils and aliphatic hydrocarbons | 97 % (73 rows) | 97 % (72 rows) |
| Vegetable and animal oils, fats, essential oils | 98 % (46 rows) | 88 % (48 rows) |
| Halogenated hydrocarbons | 63 % (70 rows) | 72 % (54 rows) |
| Foods and beverages | 98 % (46 rows) | 98 % (46 rows) |
Where the ratings differ most
Rows where the two ratings at 20 °C are at least two grades apart: 278 in total, the first 40 shown.
| Chemical | Concentration | Nylon (PA) | PVDF |
|---|---|---|---|
| Acetic Acid | 10 % | D | A |
| Acetic Acid | 100 % | D | A |
| Acetic Acid | 5 % | D | A |
| Acetic Acid | 50 % | D | A |
| Acetic Acid | 90 % | D | A |
| Acetyl Chloride | 100 % | D | A |
| Ammonium Persulfate | saturated | D | A |
| Ammonium Persulfate | aqueous | D | A |
| Antimony Trichloride | 90 % | D | A |
| Antimony Trichloride | aqueous | D | A |
| Battery Acid | 38 % | D | A |
| Benzenesulfonic Acid | saturated | D | A |
| Benzoyl Chloride | 100 % | D | A |
| Benzyl Alcohol | D | A | |
| Bromine | D | A | |
| Bromine Vapors | D | A | |
| Bromine Water | saturated | D | A |
| Calcium Chloride | alcoholic solution | D | A |
| Calcium Hypochlorite | D | A | |
| Calcium Hypochlorite | aqueous | D | A |
| Calcium Hypochlorite | aqueous | D | A |
| Carbon Tetrachloride | D | A | |
| Cetyl Alcohol | 100 % | D | A |
| Chloric Acid | 1 % | D | A |
| Chloric Acid | 10 % | D | A |
| Chloric Acid | 20 % | D | A |
| Chlorine | 97 % | D | A |
| Chlorine Gas | D | A | |
| Chlorine Water | D | A | |
| Chloroacetic Acid | 50 % | D | A |
| Chlorobenzene | D | A | |
| Chloroethanol | technical grade | D | A |
| Chloromethane (Methyl Chloride) | technical grade | D | A |
| Chromic Acid | 10 % | D | A |
| Chromic Acid | 20 % | D | A |
| Chromic Acid | 50 % | D | A |
| Cresol | D | A | |
| Developer Fluids | D | A | |
| Dichloroacetic Acid | 50 % | D | A |
| Dichloroacetic Acid | technical grade | D | A |
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
More comparisons
Frequently Asked Questions
Is Nylon (PA) or PVDF more chemical-resistant?
Of 918 chemicals rated for both materials at 20 °C, Nylon (PA) and PVDF share the same rating in 417 rows (45 %). Nylon (PA) is rated better in 88 rows and PVDF in 413 rows.
How do Nylon (PA) and PVDF compare for chemical resistance?
Based on 918 chemicals tested for both: Nylon (PA) is rated better with Alkalis, Esters and ethers. PVDF is rated better with Mineral acids, Organic acids, Phenols, Oxidising agents and halogens. They perform similarly with Ketones and aldehydes, Aromatic hydrocarbons, Fuels, mineral oils and aliphatic hydrocarbons, Vegetable and animal oils, fats, essential oils.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.