At a glance
Based on the row for saturated, 20 °C.
- Rated A, very good resistance
- PTFE, HDPE, PP, PVDF, PVC Rigid, EPDM, Viton (FPM), SS 316, SS 304, Aluminium, LDPE, FEP, Nylon (PA), Acetal (POM), Polycarbonate, PVC Flexible, Polystyrene, PETG, SAN (19)
- Rated B, good resistance
- NBR (1)
- Rated C, limited resistance
- none (0)
- Rated D, not resistant
- none (0)
- No data in the source
- ECTFE/ETFE, Silicone, Polysulfone, PMP
- Rated lower at 50 °C than at 20 °C
- PVC Rigid (A → C), NBR (B → C), PVC Flexible (A → C)
- Rating changes with concentration (20 °C)
- NBR: A (aqueous), C (any concentration); Polycarbonate: A (aqueous), B (any concentration)
Based on the row for saturated, 20 °C.
Rating profile by material family
Effect of temperature, 20 °C to 50 °C
Substance
- CAS number
- 10102-17-7
- Formula
- Na2S2O3 x 5H2O
- Hazard symbols in the source
- Xi (irritant) (pre-GHS European symbols; check the current safety data sheet)
- Concentrations listed
- aqueous; any concentration; saturated
- Also listed as
- Sodium Thiosulfate (Fixer); Sodium thiosulfate pentahydrate
- Name in the source (German)
- Natriumthiosulfat
Rating by concentration
Show as a table
| Material | aqueous | any concentration | saturated |
|---|---|---|---|
| Thermoplastics | |||
| HDPE | A | A | A |
| LDPE | A | A | A |
| PP | A | A | A |
| PVC Rigid | – | – | A |
| PVC Flexible | – | – | A |
| PMP | – | – | – |
| Polystyrene | – | – | A |
| SAN | – | – | A |
| Polycarbonate | A* | B* | A* |
| PETG | A | A* | A* |
| Acetal (POM) | A | A | A |
| Nylon (PA) | A | A | A |
| Polysulfone | – | – | – |
| Fluoropolymers | |||
| PTFE | A | A | A |
| FEP | A | A | A |
| PVDF | A | A | A |
| ECTFE/ETFE | – | A | – |
| Elastomers | |||
| EPDM | A | A | A |
| Viton (FPM) | A | A | A |
| NBR | A | C | B |
| Silicone | – | – | – |
| Metals | |||
| SS 316 | A | A | A |
| SS 304 | A | A | A |
| Aluminium | A | A | A |
* estimated rating, given in the source without a temperature
Resistance table: Sodium Thiosulfate, aqueous
Remark: Fixiernatron, "Natriumhyposulfit"
| Material | 20 °C | 50 °C | Remark |
|---|---|---|---|
| Thermoplastics | |||
| HDPE | A | A | |
| LDPE | A | A | |
| PP | A | A | |
| Polycarbonate | A* | – | |
| PETG | A | – | |
| Acetal (POM) | A | A | |
| Nylon (PA) | A | – | |
| Fluoropolymers | |||
| PTFE | A | A | |
| FEP | A | A | |
| PVDF | A | A | |
| Elastomers | |||
| EPDM | A | – | |
| Viton (FPM) | A | A | |
| NBR | A | – | |
| Metals | |||
| SS 316 | A | A | |
| SS 304 | A | A | |
| Aluminium | A | A | |
* estimated rating, given in the source without a temperature
Not rated in the source, so not in the table: PVC Rigid, PVC Flexible, PMP, Polystyrene, SAN, Polysulfone, ECTFE/ETFE, Silicone
Resistance table: Sodium Thiosulfate, any concentration
Remark: Fixiernatron, "Natriumhyposulfit"
| Material | 20 °C | 50 °C | Remark |
|---|---|---|---|
| Thermoplastics | |||
| HDPE | A | A | |
| LDPE | A | A | |
| PP | A | A | |
| Polycarbonate | B* | – | |
| PETG | A* | – | |
| Acetal (POM) | A | A | |
| Nylon (PA) | A | – | |
| Fluoropolymers | |||
| PTFE | A | A | |
| FEP | A | A | |
| PVDF | A | A | |
| ECTFE/ETFE | A | A | |
| Elastomers | |||
| EPDM | A | – | |
| Viton (FPM) | A | – | |
| NBR | C | C | |
| Metals | |||
| SS 316 | A | A | |
| SS 304 | A | A | |
| Aluminium | A | A | |
* estimated rating, given in the source without a temperature
Not rated in the source, so not in the table: PVC Rigid, PVC Flexible, PMP, Polystyrene, SAN, Polysulfone, Silicone
Resistance table: Sodium Thiosulfate, saturated
Remark: Fixiernatron, "Natriumhyposulfit"
| Material | 20 °C | 50 °C | Remark |
|---|---|---|---|
| Thermoplastics | |||
| HDPE | A | A | |
| LDPE | A | A | |
| PP | A | A | |
| PVC Rigid | A | C | |
| PVC Flexible | A | C | |
| Polystyrene | A | A | |
| SAN | A | A | |
| Polycarbonate | A* | – | |
| PETG | A* | – | |
| Acetal (POM) | A | A | |
| Nylon (PA) | A | – | |
| Fluoropolymers | |||
| PTFE | A | A | |
| FEP | A | A | |
| PVDF | A | A | |
| Elastomers | |||
| EPDM | A | – | |
| Viton (FPM) | A | A | |
| NBR | B | C | |
| Metals | |||
| SS 316 | A | A | |
| SS 304 | A | A | |
| Aluminium | A | A | |
* estimated rating, given in the source without a temperature
Not rated in the source, so not in the table: PMP, Polysulfone, ECTFE/ETFE, Silicone
Rating scale
- A very good resistance
- B good resistance
- C limited resistance
- D not resistant
- – no data
- K no general statement possible
A rating marked * is an estimate in the source, not a test result. An estimate is given as one value without a temperature.
Frequently Asked Questions
Which materials resist Sodium Thiosulfate at high concentrations?
The materials with an A rating (resistant) for Sodium Thiosulfate at 20 °C are: PTFE, HDPE, PP, PVDF, PVC Rigid, EPDM, Viton (FPM), SS 316. These can generally be used in direct contact.
Does temperature affect chemical resistance to Sodium Thiosulfate?
Yes. 3 of 16 tested materials show a worse rating at 50 °C than at 20 °C for Sodium Thiosulfate. Materials affected include: PVC Rigid, NBR, PVC Flexible.
Is PTFE safe for Sodium Thiosulfate?
PTFE is rated A for Sodium Thiosulfate at 20 °C. A rating of A means resistant, B means limited resistance, C means partly resistant, and D means not resistant.
Does concentration affect chemical resistance to Sodium Thiosulfate?
Yes. Sodium Thiosulfate is tested at 3 concentrations (aqueous, any concentration, saturated). Some materials change their rating depending on the concentration.
About this data
The ratings come from the chemical resistance list published by Bürkle GmbH, which compiled them from raw-material manufacturers’ data. They describe laboratory tests on the raw material at 20 °C and 50 °C.
A finished part also sees pressure, mechanical stress, welds and mixtures that a laboratory test does not. Treat the rating as a first filter and test under your own conditions before relying on it.
Chemicals with a similar resistance profile
Same 20 °C rating on the share of materials shown.